Please note: This post may contain affiliate links which means that if you make a purchase after clicking on one of the links, I may get a small commission (at no additional cost to you). Please see my full disclosure policy for more information.
I love Spring and all that it brings. The soft pastels in every color remind me of the flowers that are just beginning to bloom. The grass is getting greener, the birds are chirping, and the weather is getting warmer.
It is also a time when I start all of my Easter decorating, and this year my new pillow is the main star. You can get the same look in your house with my Pixelated Easter Egg Throw Pillow pattern.
This design is the third in my pixelated holiday pillow series, and this might be my favorite so far. It is a great way to use up all of those gorgeous pastel scraps you have. Of course, it’s a good excuse to buy more fabric too.
The pillow is large and looks good anywhere. It would make nice hostess gift for someone if you are invited to their home during the holiday.
So gather up all those pretty fabrics, eat a couple of jelly beans to give you some energy, and make yourself a new throw pillow.
- Finished pillow case measures 22” square and will fit a 24” pillow insert (fits better with an insert that is not too thick)
- A scant 1/4” seam allowance is used
Supplies you will need:
Front design of pillow case – Scrap fabrics cut into 2 1/2” squares (121 in all)
- Pink – 8 squares
- Yellow – 8 squares
- Green – 7 squares
- Blue – 7 squares
- Coral – 7 squares
- Purple – 7 squares
- Teal – 7 squares
- Various shades of white and off-white – 70 squares
- For the back – 2 pieces of cream or off-white fabric, both cut 22 1/2” X 16”
- 24” pillow form – A flatter pillow insert should be used
- General sewing supplies
Step 1 – Lay Out the Design
Egg Pillow Pattern
On a large, flat surface, lay out your squares, following the pattern grid.
Step 2 – Prepare To Sew
- Organize the fabric rows carefully, so the squares do not get mixed up.
- First, cut 11 small pieces of scrap paper, number them, and set them aside.
- Next, start with the top row (row 1), pick up the squares in order, and form a stack of squares for that row. Make sure the left piece of the row is on top.
- Finally, take the scrap of paper with the number 1 on it and pin it through the stack for that row. Pin it in the top left of the square so you’ll know where the top corner is.
- Repeat with the rest of the rows.
Step 3 – Sew The Front
- Sew the individual squares together, row by row. Use care to keep them in the correct order. Leave the paper marker with the row number on it, pinned to the top left corner of the row so you know the positioning. Hint: When sewing the individual squares together I sew pairs together and put a pin in the left square so I know which way it gets joined to the other pair.
- After all of the individual rows are done, start sewing them together. Take care not to sew over the paper row number, but keep the labels in place until the front of the pillow case is done.
- Press the completed top. If you used the 1/4” seam allowance, your top should measure 22 1/2” X 22 1/2”.
Pressing tip: When piecing the individual rows, make sure to press each seam in the same direction and alternate that direction with each row. For example: Press row 1 seams to the left, row 2 seams to the right, row 3 seams to the left and so on. This will make it much easier to sew the finished rows together because you will be able to nest the seams.
Step 4 – Prepare The Back
- Take one of the large pieces of back fabric and lay it, wrong side facing up.
- Fold over one of the long edges about 1/2” and press.
- Sew down the long edge.
- Repeat with the other piece.
Step 5 – Assemble The Pillow Case
- First, lay the completed front of the case on a flat surface, right side facing up.
- Then lay one of the back pieces, right side facing down, on top of the front piece, lining up the unfinished edges on the top and sides. The finished long edge will be in the middle of the pillow.
- Next, lay the second back piece, right side facing down, with the unfinished edges lined up on the bottom and sides. The finished long edge will be overlapping the other piece of the backing.
- Pin along all four sides together, around the outside of the entire case.
- Sew around the outside, using a 1/4” seam allowance. For extra stability, backstitch along the edges of the opening of the case.
- Finally, trim off the corners, taking care not to snip any seams.
Step 6 – Finish the Pillow
- Turn the case right sides out. Make sure to carefully push out the corners.
- Insert the pillow form.
Now You Have A Festive Pillow For Easter
It really does not take that long to make this pillow, and the Easter egg is bright and cheerful, not only for the holiday but throughout the spring months.
I am really enjoying coming up with these holiday pixelated throw pillows. So far I’ve done two, one for Valentine’s Day and one for St. Patrick’s Day. Up next up is some patriotic flair for the Fourth of July and I cannot wait to bring it to you!